Description
This ZionAir pneumatic hammer is suitable for all kinds of chopping and breaking jobs. The air hammer is not only supplied with a traditional spring holder but also with a new quick-change head! This makes it easy to switch the chisels quickly.
Furthermore, the air chisel has a hexagon drive so that the chisel remains firmly centered in position.
– Robust air hammer
– Pointed chisel
– Flat chisel curved
– Flat chisel straight
– Flat chisel with small angle
– Flat chisel with large angle
– Spring
– Male connector 1/4″ thread
Specifications:
– Drill hole diameter = 19mm
– Drive chisels = hex
– Stroke = 102mm
– Strokes per minute = 2000spm
– Average air consumption = 85L/min
– Air inlet = 1/4″ (male connector included)
– Working pressure = 6.3 bar
The specified air consumption is indicated at a pressure of 6.3 bar.
The air output at compressors is measured at ambient pressure, so these 2 values cannot be compared with each other.
If you need advise, consult one of our experts.
